• Leakage Alarm

If there is liquid leakage in the pipeline, the D150 liquid leakage detector will detect the liquid, and a red prompt sign will appear on the computer and the touch screen, and an alarm sound will be given to remind in time, and the pump will stop automatically after 5 minutes of no treatment.

• Auto-range

When D150 ion chromatograph is operated, it is easy to realize the simultaneous determination of 5ppb-100ppm concentration sample without setting the range, and the signal is displayed with digital signal μs/cm.

• Gas Liquid Separator

The bubble in the eluent will increase the baseline noise and reduce the sensitivity. A micro gas-liquid separator is set in the pipeline between the infusion pump and the eluent bottle to separate the bubble in the eluent from the eluent.

• Timing Startup Preheating

It usually takes about 1 hour for the ion chromatograph to balance the system from start-up to sample injection analysis. When the user has prepared the eluent (or pure water for the eluent), he can set the start-up running time of the instrument in advance (the maximum setting is 24 hours), complete the start-up operation and all parameter settings.

• Intelligent Maintenance

Set “intelligent maintenance”, the instrument can complete the flow path switch to the pure water path, the flow rate is set to 0.5ml/min, running for 1 hour.

• Mobile APP

Mobile app is easy to operate. APP monitoring: put the device in your pocket, no matter where you are, turn on your mobile phone to view and control the field device. The mobile app can remotely control the instrument on / off and observe the operation performance parameters of the instrument.

• Intelligent large screen

The large screen displays the operation parameters and status of the instrument, which is convenient for the operator to check the equipment status on site, and to complete the operation of instrument on-off, instrument maintenance, etc

CIC-D300 is a kind of ion chromatograph with dual-channel system design. It has stable performance and powerful function. Each channel runs independently at the same time, and does not interfere with each other. It can realize the simultaneous detection of anions and cations, and double the work efficiency.

The workstation of the observatory realizes the integration of the two-channel workstation, which is easy and fast to operate. One machine can meet the detection requirements of environment, food, chemical industry, electric power, disease control, electronics, mining and metallurgy and other fields.

SH-WIC5000 is a full-automatic and intelligent water quality on-line IC, which can realize real-time detection of anions and cations in water samples. The equipment removes organic impurities and solid particles from the samples to be measured by on-line pretreatment system, achieving the functions of continuous automatic sampling, sample pretreatment and data processing, and continuously uploads real-time monitoring data to headquarters or servers in 24 hours.

Full plasticized flow system, dual suppression mode, all-weather continuous operation, remote control, remote data transmission and so on, make the water quality on-line IC has perfect and advanced solution ability. The equipment can provide a complete  solutions for the monitoring of inorganic anions and cations in water samples such as tap water, surface water, circulating water of power plants and water for enterprise production.

The FDM 6000 is a portable, battery operated fuel dilution meter that determines the concentration of fuel dilution present in an oil sample within a matter of minutes. The FDM 6000 uses a unique patent pending fang design to pierce the cap of a disposable sample vial and draws in the headspace from the vial. The headspace flows over a SAW (Surface Acoustic Wave) sensor which reacts specifically to the presence of fuel vapor with a detection range of 0 – 15%. It can detect diesel, gasoline or jet fuel in engine oil. It conforms to ASTM D8004 – “Standard Test Method for Fuel Dilution of In-Service Lubricants Using Surface Acoustic Wave Sensing”

FluidScan is a handheld Infrared analyzer for lubricant and grease condition and contamination monitoring

The FluidScan® 1000 series handheld Infrared oil analyzer provides direct quantitative measurement of a lubricant’s condition and plays an important role in Machine Condition Monitoring  (MCM) for proactive and predictive maintenance in Reliability Management programs. It determines when oil needs to be serviced due to degradation of the oil chemistry or contamination by other fluids such as water or the wrong oil. It is compliant with ASTM D7889 “Standard Test Method for Field Determination of In-Service Fluid Properties Using IR Spectroscopy”.

The LaserNet 200 Series allows reliability professionals to quickly and easily assess machinery health in just minutes. By testing only a few milliliters of fluid, users see a complete picture of machine wear and particulate contamination. This enables the user to determine filtration efficiency, the type of wear mode occurring, and the change in ferrous debris concentration, for maintenance action.

With a simple push of a button, a comprehensive picture of machine wear is generated with only a few parameters:

• Particle cleanliness codes, such as ISO 4406 and ASTM D6786, indicate the overall cleanliness of the oil
• Ferrous Wear Severity Index (FWSI) indicates overall severity of the machine wear condition
• Count of large cutting, sliding and fatigue wear, along with non-metallic particles, indicates the source of the particles

Having this information allows reliability professionals to make informed decisions on the maintenance of their critical assets.

SpectroTrack is an Information Management System (IMS) optimized for laboratories that specialize in the analysis of in-service (used) lubricants for machine condition monitoring. The browser-based system is the ideal tool for accessing historical and trend information about an organization’s high-value assets. The software provides a single end-to-end view of a sample lifecycle from sample submission and receipt to results entry. The software also provides all trending, imaging, numerical and textual asset data in one secure location. Clients can see a comprehensive, historical view of fluid condition for an engine, department or an entire fleet.

SpectroTrack comes fully integrated with the Spectro Scientific instrument line including:

• Spectroil Q100 Oil Analysis Spectrometer
• SpectroLNF Q200 Particle Shape Classifier and Particle Counter
• SpectroVISC Viscometer
• FluidScan Handheld Lubricant Condition Monitor

The InfraCal Model ATR-SP is recommended for measuring oil in water, TPH in soil or FOG in wastewater concentration levels when using hexane, pentane or Vertrel MCA as the extracting solvent. Measurement data obtained with this analyzer will correlate to EPA Method 1664 as both procedures are based on evaporation techniques and measuring the residual oil and grease. The analyzer is equipped with a built-in cubic zirconia horizontal attenuated total reflection (HATR) stainless steel sample stage. The InfraCal 2 ATR-SP is a direct replacement for the original InfraCal HATR-T2 used worldwide for the determination of TOG/TPH in water and soil.

• Minimum Detection Limit Water: 0.3 ppm
• Minimum Detection Limit Soil: 3 ppm
• Method Compares: EPA 1164 & ISO 9377-2
• Solvents: Hexane, pentane, cyclohexane & Vertrel MCA